REAR A/C DISPLAY CONTROL HEAD -E265-, REMOVING AND INSTALLING, "High" A/C SYSTEM, A4 AND A5: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Remove the rear center console vent -A-. Refer to OVERVIEW - CENTER CONSOLE .
-- Disconnect the connectors -C- and if equipped connector -D- from the Rear A/C Display Control Head -E265- -B-.
-- Loosen the clamp -E- and remove the Rear A/C Display Control Head -E265- -B-.