Coolant Shut-Off Valve -N82-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clamps - Up To 25mm :3094 (or commercially available hose pinch-off pliers)
- Hose Clip Pliers :VAS6340
- Hose Clip Pliers :VAS6362
The Coolant Shut-Off Valve -N82- -A- is currently only installed in vehicles with certain engines in the right plenum chamber (for example, currently not installed on vehicles with a 1.8L and 2.0L TFSI engine). Refer to CONNECTION DIAGRAM - COOLANT HOSES ).