LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Bumpers) >> 63 Bumpers >> Rear Bumper >> Tail Pipe Trim, Removing And Installing >> Tail Pipe Trim, Removing And Installing, A4 And A5 From Product Improvement >> Removing

Tail Pipe Trim, Removing And Installing, A4 And A5 From Product Improvement: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- If equipped, free up the wiring harness -2-.

GWWA63-11815Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -arrows-.

-- Remove the tail pipe trim -1- inward.