Overview - Impact Member, RS 4, RS 5
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification. Refer to Figure
- Replace after removing.
- Quantity: 6
- Foam Seal
- Left
- Bracket
- For central valve
- Left
- Bolt
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
- Quantity: 3
- Central Valve
- Left
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
- Nut
- Tightening specification. Refer to Figure
- Central Valve
- Right
- Overview. Refer to OVERVIEW - CENTRAL VALVE .
- Bolt
- Tightening specification. Refer to OVERVIEW - CENTRAL VALVE .
- Quantity: 3
- Bracket
- Right
- For central valve
- Foam Seal
- Right
- Impact Member
- Removing and Installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES WITHOUT TRAILER HITCH .