LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Bumpers) >> 63 Bumpers >> Rear Bumper >> End Panel, Removing And Installing >> Installing

End Panel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Place the end plate -1- on the bumper cover and push it on. While doing so, the catches must fully engage in the bumper cover.

scientia non olet · About LEMON Manuals