Center Bumper Cover Mount, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the nut -arrow-.
-- Equipment version: free up the wiring harness -2-.
-- Remove the bracket with the garage door opener control module -3- and move it to the side with the connector connected.
-- Remove the bumper cover mount -1-.