LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Bumpers) >> 63 Bumpers >> Front Bumper >> Side Trim Molding, Removing And Installing >> Removing

Side Trim Molding, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the side air intake grille. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4 AND A5 BEFORE PRODUCT IMPROVEMENT .

-- Remove the center air intake grille. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4 ALLROAD BEFORE PRODUCT IMPROVEMENT .

-- Remove the side air duct. Refer to AIR DUCT, REMOVING AND INSTALLING, A4 ALLROAD FROM PRODUCT IMPROVEMENT .

-- Release the retainers -arrows- and remove the trim molding -1-.

GWWA63-11939Courtesy of AUDI OF AMERICA, LLC