Overview - Bumper Cover, RS 4, RS5 Before Product Improvement

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bumper Cover, RS4 & RS5

Courtesy of AUDI OF AMERICA, LLC

Front Spoiler
- Removing and Installing. Refer to FRONT SPOILER, REMOVING AND INSTALLING, RS 4 AND A5 .
Bolt
- 5 Nm
- Quantity: 11
End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, RS 4 AND RS 5 .
Spoiler Lower Section
- Center
- Removing and Installing. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, CENTER, RS 4 AND RS 5 BEFORE PRODUCT IMPROVEMENT .
Cover Strip
- Removing and Installing. Refer to COVER STRIP, REMOVING AND INSTALLING .
Air Duct Trim
- Removing and Installing. Refer to AIR DUCT TRIM, REMOVING AND INSTALLING, RS 4 / RS 5 BEFORE PRODUCT IMPROVEMENT .
Cover
- For the towing eye
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE, RS 4 AND RS5 BEFORE PRODUCT IMPROVEMENT .
Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A5, RS 4 AND RS 5, BEFORE PRODUCT IMPROVEMENT .
Bolt
- 2 Nm
- Quantity: 4
Lock Carrier Cover
- Removing and Installing. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
Expanding Clip
- Quantity: 6
Thread Mount
- For the bolt
Trim
- For the side air intake grille
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE TRIM, REMOVING AND INSTALLING .
Bolt
- 2 Nm
- Quantity: 3
Bolt
- 4 Nm
Expanding Rivet
Mount
- For the bumper cover
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Air Duct
- Side
- Removing and Installing. Refer to AIR GUIDE, REMOVING AND INSTALLING, A5, RS 4 AND RS 5 .
Bolt
- 2 Nm
- Quantity: 2
Trim
- For the side air intake grille
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4, S LINE, A5 S LINE, RS 4, AND RS 5 BEFORE PRODUCT IMPROVEMENT .
Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Air Intake Grille
- Side
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING, A4, S LINE, A5 S LINE, RS 4, AND RS 5 BEFORE PRODUCT IMPROVEMENT .
Spoiler Lower Section
- Side
- Removing and Installing. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, SIDE .
Bolt
- 2 Nm
- Quantity: 6