Molded Foam Part Mount, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the front parking aid sensor. Refer to FRONT PARKING AID SENSOR, REMOVING AND INSTALLING .
-- Free up the wiring harness -3-.
-- Remove the bolt -2-.
-- RS 4 and RS 5: disconnect the catch -arrow- or in this position remove the bolt and mount -1-.