Bumper Cover End Plate, Removing And Installing, A4: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bolts -arrows- from the front bumper cover end plate -1-.
-- If equipped, push the front bumper cover end plate -1- downward as far as possible and free up the wiring harness -2- in direction of -arrows-.
-- Release the catch -1- and remove the bumper cover end plate -2- toward the rear.