LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Rear Suspension) >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Wheel Bearing Unit, Removing And Installing >> Wheel Bearing Unit, Removing And Installing, AWD >> Installing

Wheel Bearing Unit, Removing And Installing, AWD: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Tighten the threaded connection between the drive axle and wheel hub. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING .

scientia non olet · About LEMON Manuals