Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- AWD equipment version: remove the rear final drive. Refer to the appropriate service information .
-- Remove the subframe. Refer to SUBFRAME, REMOVING AND INSTALLING .
-- Mount the :T40032 and :T40033 on the bonded rubber bushing and on the subframe as shown.
-- Remove the bonded rubber bushing from the subframe.