Steering Gear, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm :VAG1331
- Torque Wrench 1332 40-200Nm :VAG1332
- Engine and Gearbox Jack :VAS6931
- Ball Joint Splitter :VAS251805
- Locating Pin :T40334
- Support Brace :T40335
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Nut - Steering Gear with Tie Rods to Wheel Bearing Housing
- Bolt - Steering Intermediate Shaft to Steering Gear with Tie Rods
- Bolts - Subframe Crossbrace/Steering Gear to Subframe