Boot, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm :VAG1331
- Hose Clip Pliers :VAS6362
- Hose Clip Pliers :VAG1921
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Spring Clamp - Boot to Tie Rod End
- Clamp - Boot to Steering Gear