STEERING COLUMN, DISCONNECTING FROM Active Steering Motor -V477-

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Steering column is removed. Refer to STEERING COLUMN, REMOVING AND INSTALLING .

-- Remove the pins -1 to 4- and carefully remove the steering column from the Active Steering Motor -V477-.

Fig 1: Steering Column and Active Steering Actuator - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace the pins and insulation components after removal.

-- Carefully bring the steering column -3- and the active steering actuator -1- together -arrows- without tilting.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the insulation components -4 and 6- into the steering column and screw in the bolts -2 and 5- all the way.

-- Tighten the pins. Refer to Figure.