Wheel Bearing Housing, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Spreader Tool:3424
- Torque Wrench 1332 40-200 Nm:VAG1332
- Engine and Gearbox Jack:VAS6931
- Ball Joint Splitter :VAS251805
- Puller - Ball Joint:T40043
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Ball Joint to Wheel Bearing Housing
- Nut - Ball Joint to Control Arm