Suspension Strut, Servicing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1332 40-200 Nm:VAG1332
- Spring Compressor Kit:VAG1752
- Spring Compressor Kit - Spring Tensioner:VAG1752/1
- Spring Compressor Kit - Spring Retainer w/Inserts:VAG1752/6
- Shock Absorber Set:T10001
- Shock Absorber Set - Socket:T10001/3
- Shock Absorber Set - Extension SW6:T10001/7
- Shock Absorber Set - Reversible Ratchet:T10001/11
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Nut - Strut Mount to Shock Absorber
NOTE:
Because of different shock absorber valve systems, only install new shock absorbers from the same manufacturer on both axles, if possible.