SUBFRAME, Securing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm:VAG1331
- Torque Wrench 1332 40-200 Nm:VAG1332
- Engine and Gearbox Jack:VAS6931
- Rear Axle Support:T10552
- Locating Pins:T40327
- Engine Support Bridge:10-222A
- Mount:T40386
Tools, Preparing
-- Loosen the bolts -arrows-.
-- Adjust the dimension -a-.
- Dimension -a- = 250 mm
-- Tighten the bolts again.