SUBFRAME With Steering Gear, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque Wrench 1331 5-50 Nm:VAG1331
- Torque Wrench 1332 40-200 Nm:VAG1332
- Engine and Gearbox Jack:VAS6931
- Ball Joint Splitter :VAS251805
- Tensioning Strap:T10038
- Puller - Ball Joint:T40043
- Locating Pins:T40327
- Elbow Assembly Tool:T10118
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Subframe Crossbrace/Steering Gear to Subframe
- Nut - Coupling Rod to Shock Absorber Fork
- Nut - Stabilizer Bar to Coupling Rod