Bonded Rubber Bushing, Pressing Out
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The guide link is removed. Refer to GUIDE LINK, REMOVING AND INSTALLING
-- Mark the press-in depth -arrow- on the bonded rubber bushing -4-, for example using a waterproof felt-tip pen.
-- Arrange the special tools as shown.
- :VAS6654 Punch
- :VW412
- :VW463/2
- Bonded Rubber Bushing
- Guide Link
- :3144
- :VW402
NOTE:
Hold the guide link firmly in position while pressing the bonded rubber bushing out and in.
-- Remove the bonded rubber bushing from the guide link.