Control Arm, Removing And Installing: Notes

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Spreader Tool:3424
Torque Wrench 1332 40-200Nm:VAG1332
Engine and Gearbox Jack:VAS6931
Ball Joint Splitter :VAS251805
Engine/Gearbox Jack Adapter - Wheel Hub Support:T10149

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts

Bolt/Nut - Control Arm to Subframe
Bolt - Control Arm to Shock Absorber Fork
Nut - Ball Joint to Control Arm