Control Arm Bearing, Replacing, SUBFRAME Side: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Press Plate:VW402
- Press Piece - Multiple Use:VW412
- Press Piece - Reverse Gear Syncro:3296
- Puller - Differential Bearing:T40032
- Assembly Paste:G 052 109 A2
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolt/Nut - Control Arm to Subframe
- Bolt - Control Arm to Shock Absorber Fork
- Nut - Ball Joint to Control Arm