Triple Roller Joint Allocation
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Determine the dimension -A- with the clamps open and the CV boot pushed back.
- Dimension -A- = approximately 74 mm: drive axle with triple roller joint AAR 2600 i
-- Drive axle with Triple Roller Joint AAR 2600 i, disassembling and assembling. Refer to DRIVE AXLE, DISASSEMBLING AND ASSEMBLING, TRIPLE ROLLER JOINT AAR 2600 I AND AAR 3300 I .
- Dimension -A- = approximately 77 mm: drive axle with triple roller joint AAR 3300 i
-- Drive axle with Triple Roller Joint AAR 3300 i, disassembling and assembling. Refer to DRIVE AXLE, DISASSEMBLING AND ASSEMBLING, TRIPLE ROLLER JOINT AAR 2600 I AND AAR 3300 I .
- Dimension -A- = approximately 82 mm: drive axle with triple roller joint AAR 3700 i
-- Drive axle with Triple Roller Joint AAR 3700 i, disassembling and assembling. Refer to DRIVE AXLE, DISASSEMBLING AND ASSEMBLING, TRIPLE ROLLER JOINT AAR 3700I .