LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information)) >> 44 Wheels, Tires And Wheel Alignment >> Rim Information >> Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing >> Installing

Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the cap -1- flush against the opening in the aluminum rim from the outside.

NOTE:

Do not tilt the cap.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap is secure inside the aluminum rim.

scientia non olet · About LEMON Manuals