Charge Air Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to FRONT BUMPER .
-- Release the catches -arrow- and remove the air ducts -1 and 3-.
-- Loosen the left and right hose clamp -1- and remove the air duct pipe from the charge air cooler.
CAUTION:
Risk of destroying the charge air cooler.
- If the catches are damaged, the charge air cooler must be replaced.
-- Release the retainers in direction of -arrows- on the left and right sides and disengage the charge air cooler from the radiator.
-- Remove the charge air cooler downward.