LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Turbocharger, Supercharger [CVKB,DBPA,CWNA,CVLA,DEMA,DHDA]) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Installing

Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

If there are small impressions on the slats. Refer to appropriate service information. .

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to FRONT BUMPER .

scientia non olet · About LEMON Manuals