LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Mechanical Components (Brake System) (2 Of 2)) >> 46 Mechanical Components >> Rear Brakes >> Rear Brake Shield, Removing And Installing >> Installing

Rear Brake Shield, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Clean the contact surfaces on the brake shield and wheel hub.

-- Install the brake rotor. Refer to REAR BRAKE ROTOR, REMOVING AND INSTALLING .

WARNING:

Risk of accident!

  • With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.
  • Make sure the brakes are working correctly before driving the vehicle for the first time.
scientia non olet · About LEMON Manuals