LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Mechanical Components (Brake System) (2 Of 2)) >> 46 Mechanical Components >> Rear Brakes >> Rear Brake Carrier, Removing And Installing >> Installing

Rear Brake Carrier, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Only use mineral spirits to clean the brake carrier.

WARNING:

Health Risk.

  • Do not blow out brake system with compressed air.

-- Insert the brake carrier -1- and tighten.

GWWA46-10510Courtesy of AUDI OF AMERICA, LLC

Use new bolts -arrows-.

-- Install the brake pads. Refer to REAR BRAKE PADS, REMOVING AND INSTALLING .

WARNING:

Risk of accident!

  • With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.
  • Make sure the brakes are working correctly before driving the vehicle for the first time.