Brake Pads, Removing And Installing, 1LC/1LD/1LE/1LF/1LH: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm :VAG1331
- Piston Resetting Tool :T10145
- Brake Charger/Bleeder Unit :VAS5234
- Lithium Grease :G 052 150 A2 . Refer to the Parts Information.
NOTE:
If old brake pads are being replaced with new ones, then it is necessary to check the brake rotor thickness for wear. Pay attention to the wear specifications for the brake rotor. Refer to TECHNICAL DATA, BRAKES .