Brake Caliper, Removing And Installing, 1LC/1LD/1LE/1LF/1LH: Notes

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1332 40-200Nm :VAG1332

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and Parts Information prior to starting procedure.

Mandatory Replacement Parts

Bolts - Brake Caliper to Brake Carrier

NOTE:

In the following description the brake caliper is removed with the brake carrier and brake pads. The brake hose remains connected.

Clean bolts before reusing.

Replace the damaged bolts. Refer to the Parts Information.