Brake Caliper, Removing And Installing, 1LA/1LB: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Clean bolts before reusing.
Replace the damaged bolts. Refer to the Parts Information.
-- Carefully press the brake caliper with the brake carrier and the installed brake pads over the brake rotor.
-- Tighten the brake carrier with bolts -5-.
-- Place the brake hose in the bracket.
-- Install the wheels.
Wheel bolt tightening specification. Refer to Wheels and Tires .
-- Lower the vehicle.