Brake Pedal, Removing And Installing, Vehicles With Manual Transmission: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Do "not" apply grease or oil to the mounting pin and pin mount in the brake pedal.

Install in reverse order of removal and note the following:

-- Insert the brake pedal in the mounting bracket.

The image shows the mounting bracket when it is installed:

-- Insert the mounting pin -3- from the left all the way and secure using the clip -2- and bolt -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt to 20 Nm.

-- Install the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .

-- Connect the brake pedal to the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .

-- Install the footwell vent. Refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .

Fig 1: Identifying Footwell Vents

Courtesy of AUDI OF AMERICA, LLC

-- Install the instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

Fig 2: Identifying Driver Side Instrument Panel Cover With Bolts

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Risk of accident!

Make sure the brakes are working correctly before driving the vehicle for the first time.