Vacuum Pump, Removing And Installing, Vehicles With TFSI Engine: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the vacuum hose.

Fig 1: Locating Hose Clamp -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the vacuum pump.

Fig 2: Locating Hose Clamp -1-

Courtesy of AUDI OF AMERICA, LLC