Bearing Bushing And Guide Pins, Replacing, 1LA/1LB: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the brake caliper at the pins -12-.
-- Remove the brake caliper.
NOTE:
Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.
-- Remove the bearing bushing from the brake caliper.