LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Antilock Brake System (1 Of 2)) >> 45 Antilock Brake System >> Sensors >> Brake Lamp Switch, Removing And Installing >> Removing

Brake Lamp Switch, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ5, 2021 Audi S4, and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Fig 1: Brake Lamp Switch -F- Component Location
GWWA45-10255Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and remove the Brake Lamp Switch -F- from the brake master cylinder.

scientia non olet · About LEMON Manuals