Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Controller Housing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

-- Install the coolant pump -1- and toothed belt.

-- Pay attention that the centering piece -arrows- and seal -3- are seated correctly.

-- Tighten the coolant pump bolts. Refer to Figure.

-- After installing a new coolant pump -2-, remove the protective cap -1- from the drive wheel.

Fig 2: Identifying Coolant Pump

Courtesy of AUDI OF AMERICA, LLC

Additional procedures depending on the model: COOLANT PUMP, REMOVING AND INSTALLING .