LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Cooling System [CVKB, DBPA, CWNA, CVLA, DEMA, DHDA, DKUA]) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the bolts that were tightened with an additional turn after removing them.

Note the toothed belt sprocket installation location -item 12-  OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT - List Item:Toothed Belt Sprocket.

Additional procedures depending on the model: Refer to COOLANT PUMP, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals