LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Turbocharger, Supercharger [CYMC,CYRB,CYRC,CWPB,DDWA,DKNA,DKWA,DLHB,DDWB]) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1-.

GWWA21-11087Courtesy of AUDI OF AMERICA, LLC

-- Turn the Charge Air Pressure Sensor -G31- -2- counter-clockwise and remove from the air duct pipe.