Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Secure all hose connections with hose clamps that match the ones used in series production.

-- Install the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to FRONT BUMPER .