Sliding Bar Ball, Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Camshaft Spacer: T40191
- : T40191/1
- Protective Eyewear
Installing
CAUTION:
Risk of injuring the eyes due to the sliding bar ball springing out.
- Wear protective eyewear.
-- Insert the spring -1- in the camshaft.
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in direction of -arrow A- using the : T40191/1 and hold.
-- Push the sliding bar -3- in direction of -arrow B-.