Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the version, preliminary work may be required. Refer to Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING .

-- If necessary, remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Tip:

Different versions depending on models and version.

-- Disconnect the connectors:

Courtesy of AUDI OF AMERICA, LLC

2 - For Exhaust Cam Adjustment Valve 1 -N318-

3 - For Cam Adjustment Valve 1 -N205-

-- Remove the bolts -arrows- and then remove the camshaft adjustment valve:

2 - For Exhaust Cam Adjustment Valve 1 -N318-

4 - For Cam Adjustment Valve 1 -N205-