Upper Timing Chain Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work may be required depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft adjustment valves. Refer to Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .

-- Free up the wires.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2- and pivot the left coolant pipe upward.

-- Unclip the oil dipstick tube -1- on the upper timing chain cover in direction of -arrow- and remove from the lower timing chain cover.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 6- and the upper timing chain cover.

Courtesy of AUDI OF AMERICA, LLC