Lower Timing Chain Cover, Replacing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Engine oil drained. Refer to ENGINE OIL .

-- If installed, remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Free up the wires.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2- and pivot the left coolant pipe upward.

-- Unclip the oil dipstick tube -1- on the upper timing chain cover in direction of -arrow- and remove from the lower timing chain cover.

Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with generator: remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the bolts -1 through 15-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

There may be only eight bolts installed, depending on the version.

-- Loosen the lower timing chain cover from the bonding.