Oil Spray Jets, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Cylinder "1 to 3" :

Transmission removed. Refer to TRANSMISSION, REMOVING .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Turn the crankshaft with the : T40263 , : T40314 and the 24 mm socket in direction of -arrow- until the corresponding bolt is accessible.

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damaging the engine by the timing mechanism skipping.

- Only let the engine turn in the direction of engine rotation.

Removing Cylinder "4" :

The engine is removed and secured to the engine/transmission holder. Refer to ENGINE, SECURING TO Engine and Transmission Holder .

-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the connecting rod bearing cap.

-- Remove the crankshaft bearing cap.

-- Remove the crankshaft.

Continued for All Cylinders:

-- Remove the pressure relief valve -1- using the : T10545 .

Fig 1: Exploded View Of Oil Spray Jet And Pressure Relief Valve

Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil spray jet -2-.