Sealing Flange, Removing And Installing, Transmission Side: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicles without high-voltage system: transmission removed. Refer to TRANSMISSION, REMOVING .
- Vehicle with high-voltage system: engine is removed and is secured on the : VAS6931 . Refer to ENGINE, SECURING TO Engine and Transmission Holder .
-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Loosen the sealing flange from the bond.
-- Cover open engine components.