LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Crankshaft, Cylinder Block [CYMC,CYRB,CYRC,CWPB,DAXB,DAXC,CJEB,CJED,CJEE,CNCD,CNCE,CUHA,CUJA,CNCB,CUHB,DAYB,CYGA,CYNB,CYPA,CYPB,CYYA,CVJA,DDWA,DJYA,DKWA,DNTA,DKNA,DLHA,DLHB,DMFA,DKWB,DLGA]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the : 10-201  to loosen the bolts.

GWWA13-11063Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Risk of damaging the drive plate by using an unsuitable tool.

- When loosening and tightening the bolts, do not damage the drive plate centering flange.

-- Remove the drive plate bolts -1- using an internal multi-point socket with at least a 40 mm shaft length.

scientia non olet · About LEMON Manuals