Vibration Damper, Removing And Installing, Starter Generator: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wrench - 21mm: T40263
- Adapter: T40314
- Counterhold: T40378 or
- Counterhold: T40379
- Vibration Damper Assembly Tool: T10531
- Vibration Damper Assembly Tool - Adapter: T10531/5
- Assembly Tool: T10531/5-/6
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.