Ribbed Belt, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

There Is a Risk of Injury If the Radiator Fan Turns on by Itself.

- When performing procedures near the radiator maintain a distance to the radiator.

Vehicles with Generator:

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of Destroying a Used Ribbed Belt by Reversing the Running Direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Pivot the tensioner clockwise in direction of -arrow- and lock using the : T10060A .

-- Remove the ribbed belt.

Vehicles with Starter Generator:

Fig 2: Direction Of Turning The Tensioner

Courtesy of AUDI OF AMERICA, LLC

-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.

-- Secure the tensioner using the : T10060A .

-- Remove the ribbed belt.