LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Crankshaft, Cylinder Block [CYMC,CYRB,CYRC,CWPB,DAXB,DAXC,CJEB,CJED,CJEE,CNCD,CNCE,CUHA,CUJA,CNCB,CUHB,DAYB,CYGA,CYNB,CYPA,CYPB,CYYA,CVJA,DDWA,DJYA,DKWA,DNTA,DKNA,DLHA,DLHB,DMFA,DKWB,DLGA]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Starter Generator

Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Starter Generator

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2019 Audi A4 allroad, 2019 Audi A4 Quattro, and 2018 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

GWWA27-10704Courtesy of AUDI OF AMERICA, LLC

-- Remove the tensioner -1-.

Installing 

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Tightening Specifications 

scientia non olet · About LEMON Manuals