Engine, Supporting In Installation Position
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2019 Audi A4 allroad, 2019 Audi A4 Quattro, 2018 Audi A4 allroad, 2018 Audi A4 Quattro, and 2017 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Support Bridge: 10-222A
Procedure
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Position the : 10-222A as shown on the left and right fender bolting edges.
-- Engage the : 10-222A/11 on the engine lifting eye.
-- Pretension the engine with the spindle, do not lift.
Assembling
Assemble in the reverse order of removal. Note the following:
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .